Operation Manual

Cryptography Commands
Mobility System Software Command Reference Guide
Version 7.3
16 – 418
History
Examples
To display information about the certificate of a certificate authority, type the following
command:
MX# show crypto ca-certificate
Table 16– 1 describes the fields in the display.
See Also
● crypto ca-certificate on page 16-410
● show crypto certificate on page 16-418
show crypto certificate
Displays information about one of the cryptographic certificates installed on the MX.
Syntax show crypto certificate {admin | eap | web}
Defaults None.
Access Enabled.
History
Usage
You must have generated a self-signed certificate or obtained a certificate from a
certificate authority before displaying information about the certificate.
Version 1.0 Command introduced
Version 3.0 webaaa option added
Version 4.1 webaaa option renamed to web
Table 16– 1. show crypto ca-certificate Output
Fields Description
Version Version of the X.509 certificate.
Serial Number A unique identifier for the certificate or signature.
Subject Name of the certificate owner.
Signature Algorithm Algorithm that created the signature, such as RSA MD5 or
RSA SHA.
Issuer Certificate authority that issued the certificate or signature.
Validity Time period for which the certificate is valid.
admin Displays information about the administrative certificate that authenticates the MX to
RingMaster or Web View.
eap Displays information about the EAP certificate that authenticates the MX to 802.1X
supplicants (clients).
web Displays information about the WebAAA certificate that authenticates the MX to
WebAAA clients.
Version 1.0 Command introduced
Version 3.0 webaaa option added
Version 4.1 webaaa option renamed to web