Operation Manual
Security ACL Commands
Mobility System Software Command Reference Guide
Version 7.3
15 – 402
show security acl
Displays a summary of the security ACLs that are mapped.
Syntax
show security acl
Defaults
None.
Access
Enabled.
History
Introduced in MSS Version 1.0.
Usage
This command lists only the ACLs mapped to something (a user, or VLAN, or port, and so
on). To list all committed ACLs, use the show security acl info command. To list ACLs that are
not yet committed, use the show security acl editbuffer command.
Examples
To display a summary of the mapped security ACLs on an MX, type the following
command:
MX# show security acl
ACL table
ACL Type Class Mapping
---------------------------- ---- ------ -------
acl_123 IP Static Port 2 In
acl_133 IP Static Port 4 In
acl_124 IP Static
See Also
● clear security acl on page 15-391
● commit security acl on page 15-394
● set security acl on page 15-395
● show security acl editbuffer on page 15-402
● show security acl info on page 15-404
show security acl dscp
This command has been renamed in MSS Version 4.1. See show qos dscp-table on page 7-89.
show security acl editbuffer
Displays a summary of the security ACLs that have not yet been committed to the configuration.
Syntax
show security acl [info all] editbuffer
Defaults
None.
Access
Enabled.
History
Introduced in MSS Version 1.0.
Examples
To view a summary of the security ACLs in the edit buffer, type the following command:
MX# show security acl editbuffer
ACL edit-buffer table
ACL Type Status
info all Displays the ACEs in each uncommitted ACL. Without this option, only the ACE
names are listed.