Operation Manual

Port Commands
Port Commands
5 – 45
clear port-group
Removes a port group.
Syntax clear port-group name name
Defaults None.
Access Enabled.
History Introduced in MSS Version 1.0.
Examples The following command clears port group server1:
MX# clear port-group name server1
success: change accepted.
See Also
● set port-group on page 5-54
● show port-group on page 5-62
clear port media-type (deprecated)
Disables the copper interface and reenables the fiber interface on an MX-400 gigabit Ethernet
port.
Syntax clear port media-type name
Defaults The GBIC (fiber) interface is enabled, and the copper interface is disabled, by default.
Access Enabled.
History
Usage
This command applies only to the MX-400. This command does not affect a link that is
already active on the port.
Examples The following command disables the copper interface and reenables the fiber interface
on port 2:
MX-400# clear port media-type name
See Also
● set port media-type(deprecated) on page 5-55
● show port media-type(deprecated) on page 5-63
name name Name of the port group.
name List of physical ports. MSS disables the copper interface and reenables the
fiber interface on all the specified ports.
MSS Version 4.0 Command introduced.
MSS Version 7.0 port-list changed to literal value of name.
MSS Version 7.1 Deprecated.