Operation Manual

STP Commands
Mobility System Software Command Reference Guide
Version 7.3
13 – 368
6 1 disable
7 1 disable
8 1 disable
10 1 disable
15 1 disable
16 1 disable
17 1 disable
18 1 disable
19 1 disable
20 1 disable
21 1 disable
22 1 disable
11 2 enable
12 2 disable
13 2 disable
14 2 enable
Table 13– 2 describes the fields in this display.
See Also set spantree portfast on page 13-361
show spantree portvlancost
Displays the cost of a port on a path to the STP root bridge, for each of the port of the VLANs.
Syntax show spantree portvlancost port-list
Defaults None.
Access All.
History Introduced in MSS Version 1.0.
Examples The following command shows the STP port cost of port 1:
MX# show spantree portvlancost 1
port 1 VLAN 1 have path cost 19
See Also
● clear spantree portcost on page 13-355
● clear spantree portvlancost on page 13-357
● set spantree portcost on page 13-360
● set spantree portvlancost on page 13-362
● show spantree on page 13-364
Table 13– 2. Output for show spantree portfast
Field Description
Port Port number.
VLAN VLAN number.
Portfast State of the uplink fast convergence feature:
❑ Enable
❑ Disable
port-list List of ports.