Operation Manual

MP Access Point Commands
MP Access Point Commands
12 – 361
Keep initial VLAN Indicates whether the keep-initial-vlan option is enabled.
Web Portal Session
Timeout
When a Web Portal WebAAA session is placed in the Deassociated
state, how many seconds the session can remain in that state before
being terminated automatically.
Mesh enabled Whether WLAN mesh services are enabled for the service profile.
Web Portal ACL Name of the ACL used to filter traffic for Web Portal users associated
with this service profile’s SSID while the users are being
authenticated.
Bridging enabled If wireless bridging is enabled for this service profile.
Load Balance Exempt If the MP radios managed by this service profile are exempted (do not
participate in) RF load balancing.
Web Portal Logout If the Web Portal WebAAA logout functionality has been enabled.
Custom Web Portal
Logout URL
If configured, the URL that Web Portal WebAAA users can access in
order to terminate their sessions.
WEP Key 1 value State of static WEP key number 1. Radios can use this key to encrypt
traffic with static Wired-Equivalent Privacy (WEP):
❑ none—The key is not configured.
❑ preset—The key is configured.
Note: The WEP parameters apply to traffic only on the encrypted
SSID.
WEP Key 2 value State of static WEP key number 2:
❑ none—The key is not configured.
❑ preset—The key is configured.
WEP Key 3 value State of static WEP key number 3:
❑ none—The key is not configured.
❑ preset—The key is configured.
WEP Key 4 value State of static WEP key number 4:
❑ none—The key is not configured.
❑ preset—The key is configured.
WEP Unicast Index Index of the static WEP key used to encrypt unicast traffic on an
encrypted SSID.
WEP Multicast Index Index of the static WEP key used to encrypt multicast traffic on an
encrypted SSID.
Shared Key Auth Indicates whether shared-key authentication is enabled.
WPA enabled
or
RSN enabled
Indicates that the Wi-Fi Protected Access (WPA) or Robust Security
Network (RSN) information element (IE) is enabled. Additional fields
display the settings of other WPA or RSN parameters:
❑ ciphers—Lists the cipher suites advertised by radios in the radio profile
mapped to this service profile.
❑ authentication—Lists the authentication methods supported for WPA or
RSN clients:
• 802.1X—dynamic authentication
• PSK—preshared key authentication
❑ TKIP countermeasures time—Indicates the amount of time (in ms) MSS
enforces countermeasures following a second message integrity code (MIC)
failure within a 60-second period.
Note: These fields are displayed only when the WPA IE or RSN IE is
enabled.
Table 12– 19. Output for show service-profile (continued)
Field Description