Operation Manual

System Services Commands
Mobility System Software Command Reference Guide
Version 7.3
4 – 40
0 5 0 5 0 5 0 5 0 5 0 |
Memory utilization history for the past hour
* = average utilization (MBytes) ^ = peak utilization (MBytes)
The overall field shows the CPU load as a percentage from the time the MX was booted. The delta
field shows CPU load as a percentage from the last time the show load command was entered.
See Also show system on page 4-40
show system
Displays system information.
Syntax show system
Defaults None.
Access Enabled.
History
Examples
To show system information, type the following command:
MX# show system
===============================================================================
Product Name: MX
System Name: MX-bldg3
System Countrycode: US
System Location: first-floor-bldg3
System Contact: [e-mail]
System IP: 192.168.12.7
System Secret Encrypted:
System Console-Timeout: 120 seconds
System Idle Timeout:3600
System MAC: 00:0B:0E:00:04:30
===============================================================================
Boot Time: 2003-11-07 15:45:49
Uptime: 13 days 04:29:10
===============================================================================
Fan status: fan1 OK fan2 OK fan3 OK
Temperature: temp1 ok temp2 ok temp3 ok
PSU Status: Lower Power Supply DC ok AC ok Upper Power Supply missing
Memory: 97.04/744.03 (13%)
Total PoE Draw (W): 29.000
===============================================================================
Table 4– 2 describes the fields of show system output.
Version 1.0 Command introduced
Version 2.0 System Description field added
Version 3.0 System Description field removed
Version 4.0 License field removed. To display license information, use the show license
command.
Version 7.0 Total Power over Ethernet changed to Total PoE draw (W).