Operation Manual

MP Access Point Commands
MP Access Point Commands
12 – 359
Short retry limit: 5 Long retry limit: 5
Auth fallthru: none Sygate On-Demand (SODA): no
Enforce SODA checks: yes SODA remediation ACL:
Custom success web-page: Custom failure web-page:
Custom logout web-page: Custom agent-directory:
Static COS: no COS: 0
Client DSCP: no CAC mode: none
CAC sessions: 14 User idle timeout: 180
Idle client probing: yes Keep initial vlan: no
Web Portal Session Timeout: 5 Mesh enabled: no
Web Portal ACL: Bridging enabled: no
Load Balance Exempt: no Web Portal Logout: no
Custom Web Portal Logout URL:
WEP Key 1 value: <none> WEP Key 2 value: <none>
WEP Key 3 value: <none> WEP Key 4 value: <none>
WEP Unicast Index: 1 WEP Multicast Index: 1
Shared Key Auth: NO
11a beacon rate: 6.0 multicast rate: AUTO
11a mandatory rate: 6.0,12.0,24.0 standard rates: 9.0,18.0,36.0,48.0,54.0
11b beacon rate: 2.0 multicast rate: AUTO
11b mandatory rate: 1.0,2.0 standard rates: 5.5,11.0
11g beacon rate: 2.0 multicast rate: AUTO
11g mandatory rate: 1.0,2.0,5.5,11.0 standard rates: 6.0,9.0,12.0,18.0,24.0,36.0,48.0,54.0
Table 12– 19 describes the fields in this display.
Table 12– 19. Output for show service-profile
Field Description
ssid-name Service set identifier (SSID) managed by this service profile.
ssid-type SSID type:
❑ crypto—Wireless traffic for the SSID is encrypted.
❑ clear—Wireless traffic for the SSID is unencrypted.
Beacon Indicates whether the radio sends beacons, to advertise the SSID:
❑ no
❑ yes
Proxy ARP Indicates whether proxy ARP is enabled. When this feature is enabled,
MSS answers ARP requests on behalf of wireless clients.
DHCP restrict Indicates whether DHCP Restrict is enabled. When this feature is
enabled, MSS allows only DHCP traffic for a new client until the client
has successfully completed authentication and authorization.
No broadcast Indicates if broadcast restriction is enabled. When this feature is
enabled, MSS sends ARP requests and DHCP Offers and Acks as
unicasts to their target clients instead of forwarding them as
broadcasts.
Short retry limit Number of times a radio serving the service-profile’s SSID can send a
short unicast frame without receiving an acknowledgment.
Long retry limit Number of times a radio serving the service-profile SSID can send a
long unicast frame without receiving an acknowledgment. A long
unicast frame is a frame that is equal to or longer than the RTS
threshold.