Operation Manual

MP Access Point Commands
Mobility System Software Command Reference Guide
Version 7.3
12 – 354
MX# show load-balancing group blue
Load-balancing group: blue
IP address AP Radio Clients
------------------ ---- ----- -------
10.2.28.200 3 1 0
Table 12– 17 describes the fields in displayed by the show load-balancing group command.
See Also
● set load-balancing strictness on page 12-259
● set ap radio load-balancing on page 12-251
● set ap local-switching mode on page 12-244
show radio-profile
Displays radio profile information.
Syntax show radio-profile {profile | ?}
Defaults None.
Access Enabled.
History
Table 12– 17. Output for show load-balancing group
Field Description
IP address The IP address of the MP in the load-balancing group.
AP MP number
Radio Radio number
Overlap The amount of overlapping coverage area the specified MP radio has
with the MP radio in the list. An overlap of 100/100 indicates that the
MP radios have exactly the same coverage area.
Clients The current client load on the MP radio.
profile Displays information about the named radio profile.
? Displays a list of radio profiles.
Version 1.0 Command introduced
Version 1.1 New fields added to indicate the following:
❑ Support of 802.11b/g radios for association by 802.11b clients
❑ Wi-Fi Protected Access (WPA) parameter settings