Operation Manual
MP Access Point Commands
MP Access Point Commands
12 – 343
Table 12– 8. Output for show ap status
Field Description
Flags The following flags are displayed as part of the MP status:
❑ o = operational —The MP is operational on the network.
❑ c = configure [0] — The MP is configured.
❑ d = download [0] — The MP is configured to download new software.
❑ b = boot — The MP can boot on the network.
❑ x = down — The MP is down on the network.
❑ n = unconfigured — The MP has no configuration.
❑ a = auto — The MP is configured in auto mode.
❑ m = mesh AP — The MP is configured for Mesh services.
❑ p/P (ena/actv) = — The MP is configured as a Mesh Portal. The lower-case p
means that the portal is inactive, and the upper-case P indicates that the
Portal is active.
❑ r = redundant — The MP is configured as a redundant AP.
❑ i = insecure — The MP is sending network traffic in the clear.
❑ e = encrypted — The MP is configured with encryption.
❑ u = unencrypted — The MP is configured with unencrypted security.
Radio The following flags are displayed as part of the radio status:
❑ E = enabled - 20MHz
❑ S = sentry
❑ W/w = enabled - 40MHz wide channel (HTplus/HTminus)
❑ D = admin disabled
IP Address * = AP behind NAT — The MP is configured behind a device with NAT
enabled.
AP Identifier for the MP on the MX.
Flag Letters that denote current status as described above.
IP-addr IP address of the MP. The address is assigned to the MP by a DHCP
server.
Note: This field is applicable only if the MP is not directly attached to
the MX.
Model MP model number.
MAC Address The MAC address of the MP.
Radio 1
Radio 2
802.11 type and configuration state of the radio.
❑ Displays current status using the Radio flags.
❑ Displays operational channels.
Uptime Amount of time since the MP booted using this link.
Table 12– 9. Output for show ap status verbose
Field Description
AP The index number of the connected MP
Name The name of the MP.
Model
❑ MP model number
❑ Revision number
❑ Serial Number
❑ Firmware versions
❑ Software version
❑ Boot software version