Operation Manual

MP Access Point Commands
Mobility System Software Command Reference Guide
Version 7.3
12 – 338
show ap etherstats
Displays Ethernet statistics for an Ethernet port on an MP.
Syntax show ap etherstats apnum
Defaults None.
Access Enabled.
History
Examples The following command displays Ethernet statistics for the Ethernet ports on
Distributed MP 1:
MX# show ap etherstats 1
AP: 1 ether: 1
=================================
RxUnicast: 75432 TxGoodFrames: 55210
RxMulticast: 18789 TxSingleColl: 32
RxBroadcast: 8 TxLateColl: 0
RxGoodFrames: 94229 TxMaxColl: 0
RxAlignErrs: 0 TxMultiColl: 47
RxShortFrames: 0 TxUnderruns: 0
RxCrcErrors: 0 TxCarrierLoss: 0
RxOverruns: 0 TxDeferred: 150
RxDiscards: 0
AP: 1 ether: 2
=================================
RxUnicast: 64379 TxGoodFrames: 60621
RxMulticast: 21798 TxSingleColl: 32
RxBroadcast: 11 TxLateColl: 0
RxGoodFrames: 86188 TxMaxColl: 0
RxAlignErrs: 0 TxMultiColl: 12
RxShortFrames: 0 TxUnderruns: 0
RxCrcErrors: 0 TxCarrierLoss: 0
RxOverruns: 0 TxDeferred: 111
RxDiscards: 0
Table 12– 6 describes the fields in this display.
apnum Index value that identifies the MP on the MX. You can
specify a value from 1 to 9999.
Version 3.0 Command introduced.
Version 6.2 Added index value range from 1 to 9999.
Table 12– 6. Output for show ap etherstats
Field Description
RxUnicast Number of unicast frames received.
RxMulticast Number of multicast frames received.
RxBroadcast Number of broadcast frames received.
RxGoodFrames Number of frames received properly from the link.