Operation Manual

MP Access Point Commands
MP Access Point Commands
12 – 335
See Also show sessions network on page 19-454
show ap counters voice-details
Displays information about VoIP calls on the network.
Syntax show ap counters apnum [radio {1 | 2}] voice-details
Defaults None
Access Enabled
History Added in MSS Version 7.1
Examples The following command displays voice details for AP 1 and radio 1:
MX# show ap counters 1 radio 1 voice-details
AP: 1 radio: 1
================================
Current Active Calls Quality Cumulative Voice Calls
BAD POOR FAIR GOOD EXCELLENT Accepted Rejected
-------------------------------------------------------------------------------------
Calls 0 0 0 0 0 1 0
Percentage 0 0 0 0 0 100 0
show ap fdb
Displays the entries in a specified MP forwarding database.
Syntax show ap fdb {apnum | all | hash-utilization [apnum |all ]}
Defaults None.
Access All.
Table 12– 3. Output for show voice-details
Field Description
Current Active Call Quality Calls are rated from Bad to Excellent
Cumulative Accepted Total number of calls accepted on the
network.
Voice Calls Rejected Total number of calls rejected on the
network.
Calls Number of calls rated Bad to Excellent
Percentage Percentage of calls per rating category.
apnum Index value that identifies the MP on the MX. You can specify
a value from 1 to 9999.
all Show all MP forwarding databases.
hash-utilization