Operation Manual

MP Access Point Commands
MP Access Point Commands
12 – 331
Defaults None.
Access Enabled.
History
Usage
To display statistics counters and other information for individual user sessions, use the
show sessions network command.
Examples The following command shows statistics counters for Distributed MP 7:
MX# show ap counters 7
AP: 7 radio: 1
=================================
LastPktXferRate 2 PktTxCount 73473
NumCntInPwrSave 0 MultiPktDrop 0
LastPktRxSigStrength -89 MultiBytDrop 0
LastPktSigNoiseRatio 4 User Sessions 0
TKIP Pkt Transfer Ct 0 MIC Error Ct 0
TKIP Pkt Replays 0 TKIP Decrypt Err 0
CCMP Pkt Decrypt Err 0 CCMP Pkt Replays 0
CCMP Pkt Transfer Ct 0 RadioResets 0
Radio Recv Phy Err Ct 0 Transmit Retries 60501
Radio Adjusted Tx Pwr 15 Noise Floor -93
802.3 Packet Tx Ct 0 802.3 Packet Rx Ct 0
No Receive Descriptor 0 Illegal Rates 2
radio 1 Shows statistics counters for radio 1.
radio 2 Shows statistics counters for radio 2. (This option does
not apply to single-radio models.)
Version 1.0 Command introduced.
Version 1.1 New fields added for Wi-Fi Protected Access
(WPA):
❑ TKIP Pkt Transfer Ct
❑ TKIP Pkt Replays
❑ CCMP Pkt Decrypt Err
❑ CCMP Pkt Transfer Ct
❑ MIC Error Ct
❑ TKIP Decrypt Err
❑ CCMP Pkt Replays
Version 2.0 Option dap added for Distributed MPs.
Version 4.0 New fields added:
❑ Radio Recv Phy Err Ct
❑ Transmit Retries
❑ Radio Adjusted Tx Pwr
❑ Noise Floor
❑ 802.3 Packet Tx Ct
❑ 802.3 Packet Rx Ct
❑ No Receive Descriptor
Version 6.0 Option dap removed.
Field Illegal Rates added
Version 6.2 Added index value range of 1 to 9999.
Version 7.1 Added the option voice-details.