Operation Manual

MP Access Point Commands
MP Access Point Commands
12 – 327
10.5.4.51 00:0b:0e:00:04:0c 1 EXPIRED DYNAMIC
10.5.4.53 00:0b:0e:02:76:f7 1 RESOLVED LOCAL
Table 13 describes the fields in this display.
See Also
● set ap local-switching mode on page 12-244
● set vlan-profile on page 6-75
show ap config
Displays a summary of MPs configured on your network.
Syntax show ap config [verbose]
Defaults None
Access Enabled
History Introduced in MSS Version 7.0
Examples To display a summary of MPs configured on your network, enter the following
command:
MX# show ap config.
Table 13.Output for show ap arp
Field Description
Host IP address, hostname, or alias.
HW Address MAC address mapped to the IP address, hostname, or alias.
VLAN VLAN the entry is for.
State Entry state:
❑ RESOLVING—MSS sent an ARP request for the entry and is waiting for
the reply.
❑ RESOLVED—Entry is resolved.
❑ EXPIRED—Entry is expired.
Type Entry type:
❑ DYNAMIC—Entry was learned from network traffic and ages out if
unused for longer than the ARP aging timeout.
❑ LOCAL—Entry for the MX MAC address. Each VLAN has one local entry
for the switch MAC address.
❑ PERMANENT—Entry does not age out and remains in the configuration
even following a reboot.
❑ STATIC—Entry does not age out but is removed after a reboot.
AP AP Name Model Mode Radio 1 profile Radio 2 profile
auto disabled default default
3 AP03 MP-372 default aaaaaaaa123456