Operation Manual

MP Access Point Commands
Mobility System Software Command Reference Guide
Version 7.3
12 – 324
show ap acl hits
Displays the number of packets filtered by security ACLs (“hits”) on the specified MP if the MP is
configured to perform local switching. Each time a packet is filtered by a security ACL, the MP
ACL hit counter increments.
Syntax show ap acl hits apnum
Defaults None.
Access Enabled.
Table 12– 5. 11n Counter Outut
Packet stats
❑ Tx packets count —Number of packets sent
❑ Rx packets count — Number of packets received
❑ 40MHz Tx packets count — Number of packets sent on the
40 MHz channel
❑ 40MHz Rx packets count — Number of packets received on
the 40 MHz channel
❑ Tx Packet Retry count — Number of packets resent
Client stats
❑ Associated clients — Number of clients on the radio
❑ 11n clients— Number of 11n clients
❑ Powersave clients— Number of clients configured for
powersave mode
❑ SM powersave clients —
Frame Aggregation stats
❑ A-MSDU Tx count — Number of MSDU packets sent
❑ A-MSDU Rx count — Number of MSDU packets received
❑ A-MSDU Tx frame count — Number of MSDU frames sent
❑ A-MSDU Rx frame count — Number of MSDU frames
received
❑ A-MSDU retry count — Number of MSDU packets resent
❑ A-MPDU Tx count — Number of MPDU packets sent
❑ A-MPDU Rx count — Number of MPDU packets received
❑ A-MPDU Tx frame count — Number of MPDU frames sent
❑ A-MPDU Rx frame count — Number of MPDU frames
received
❑ Compound Aggregates — The number of aggregated
packets
size
❑ A-MPDU Tx count — Number of MSDU packets sent
❑ A-MPDU Rx count — Number of MSDU packets received
❑ A-MSDU Tx count — Number of MPDU packets sent
❑ A-MSDU Rx count — Number of MPDU packets received
❑ Peak — The largest size packet sent or received.
subframes
❑ A-MPDU Tx count — Number of MSDU packets sent
❑ A-MPDU Rx count — Number of MSDU packets received
❑ A-MSDU Tx count — Number of MPDU packets sent
❑ A-MSDU Rx count —Number of MPDU packets received
❑ Peak — The highest number of subframes sent or received.
apnum Index value that identifies the MP on the MX. You can specify a value from 1 to
9999.