Operation Manual

System Services Commands
System Services Commands
4 – 35
See Also
● clear system on page 4-21
● show system on page 4-40
set system ip-address
Sets the system IP address so that it can be used by various services in the MX.
Syntax set system ip-address ip-addr
Defaults None.
Access Enabled.
History Introduced in MSS Version 1.0.
Examples The following command sets the IP address of the MX to 192.168.253.1:
MX# set system ip-address 192.168.253.1
success: change accepted.
See Also
● clear system on page 4-21
● set interface on page 8-102
● show system on page 4-40
set system location
Stores location information for the MX.
Syntax set system location string
Defaults None.
Access Enabled.
History
Usage
You can include spaces in the system location string, but cannot exceed 256 characters.
To view the system location string, type the show system command.
W arning!
Any currently configured Mobility Domain operations cease if you change the IP
address. If you change the address, you must reset the Mobility Domain.
ip-addr IP address, in dotted decimal notation.
string Alphanumeric string up to 256 characters long
MSS Version 1.0 Command introduced.
MSS Version 7.3 Ability to include spaces added.