Operation Manual

MP Access Point Commands

Mobility System Software Command Reference Guide

Version 7.3

12 – 306

Syntax

set service-profile profile-name soda enforce-checks {enable | disable}

Defaults

By default, SODA agent checks are performed before the client is allowed access to the

network.

Access

Enabled

History

Introduced in MSS Version 4.2.

Usage

When the SODA agent is enabled in a service profile, by default the SODA agent checks

are downloaded to a client and run before the client is allowed on the network. You can use this

command to disable the enforcement of the SODA security checks, so that the client is allowed

access to the network immediately after the SODA agent is downloaded, rather than waiting for

the security checks to be run.

When the enforce checks option is enabled, upon successful completion of the SODA agent checks,

the client performs an HTTP Get operation to load the success page. Upon loading the success

page, the client is granted access to the network.

In order for the client to load the success page, you must make sure the SODA agent is configured

(through SODA Manager) with the correct URL of the success page, so that the MX can serve the

page to the client.

Similarly, you must make sure the SODA agent is configured with the correct URLs of the failure

and logout pages, so that when the client requests these pages, the MX can serve those pages as

well.

Examples

The following command allows network access to clients after they have downloaded

the SODA agent, but without requiring that the SODA agent checks be completed:

MX# set service-profile sp1 soda enforce-checks disable

success: change accepted.