Operation Manual

MP Access Point Commands
MP Access Point Commands
12 – 305
Syntax set service-profile profile-name short-retry-count threshold
Defaults The default short unicast retry threshold is 5 attempts.
Access Enabled.
History Introduced in MSS Version 4.2.
Examples The following command changes the short retry threshold for service profile sp1 to 3:
MX# set service-profile sp1 short-retry-count 3
success: change accepted.
See Also
● set radio-profile frag-threshold on page 12-271
● set service-profile long-retry-count on page 12-298
● show service-profile on page 12-357
set service-profile soda agent-directory
Specifies the directory on the MX where the SODA agent files for a service profile are located.
Syntax set service-profile profile-name soda agent-directory directory
Defaults By default, the MX expects SODA agent files to be located in a directory with the same
name as the service profile.
Access Enabled.
History Introduced in MSS Version 4.2.
Usage If the same SODA agent is used for multiple service profiles, you can use this command to
specify a single directory for SODA agent files on the MX, rather than placing the same SODA
agent files in a separate directory for each service profile.
Examples The following command specifies soda-agent as the location for SODA agent files for
service profile sp1:
MX# set service-profile sp1 soda agent-directory soda-agent
success: change accepted.
See Also
● install soda agent on page 21-490
● uninstall soda agent on page 21-502
● show service-profile on page 12-357
set service-profile soda enforce-checks
Specifies whether a client is allowed access to the network after it has downloaded and run the
SODA agent security checks.
profile-name Service profile name.
threshold Number of times a radio can send the same short unicast frame. You can
enter a value from 1 through 15.
profile-name Service profile name.
directory Directory on the MX for SODA agent files.