Operation Manual

MP Access Point Commands
MP Access Point Commands
12 – 297
Syntax set service-profile profile-name idle-client-probing {enable | disable}
Defaults Idle-client probing is enabled by default.
Access Enabled.
History Introduced in MSS Version 4.2.
Usage The length of time a client can remain idle (unresponsive to idle-client probes) is specified
by the user-idle-timeout command.
Examples The following command disables idle-client keepalives on service profile sp1:
MX# set service-profile sp1 idle-client-probing disable
success: change accepted.
See Also
● set service-profile user-idle-timeout on page 12-314
● show service-profile on page 12-357
set service-profile keep-initial-vlan
Configures MP radios managed by the radio profile to leave a roamed user on the VLAN assigned
by the MX where the user logged on. When this option is disabled, a users VLAN is reassigned by
each MX when a user roams.
Syntax set service-profile profile-name keep-initial-vlan {enable | disable}
Defaults This option is disabled by default.
Access Enabled.
History Introduced in MSS Version 5.0.
Usage Even when this option is enabled, the MX that a user roams to (the roamed-to MX) can
reassign the VLAN in any of the following cases:
● A location policy on the local MX reassigns the VLAN.
● The user is configured in the MX local database and the VLAN-Name attribute is set on the
user or on a user group the user is in.
● The access rule on the roamed-to MX uses RADIUS, and the VLAN-Name attribute is set on
the RADIUS server.
Examples The following command enables the keep-initial-vlan option on service profile sp3:
MX# set service-profile sp3 keep-initial-vlan enable
success: change accepted.
profile-name Service profile name.
enable Enables keepalives.
disable Disables keepalives.
profile-name Service profile name.
enable Enables radios to leave a roamed user on the same VLAN instead of
reassigning the VLAN.
disable Configures radios to reassign a roamed user VLAN.