Operation Manual

MP Access Point Commands
MP Access Point Commands
12 – 285
set service-profile 11n
Configures maximum MPDU and MSDU packet length, frame aggregation for 802.11n and the
short guard interval for 11n network traffic.
Syntax set service-profile profile-name 11n a-mpdu-max-length [ 8K | 16K | 32K |
64K] a-msdu-max-length [4K | 8K] frame-aggregation [msdu | mpdu | all | disable]
mode-na [enable | disable |required] mode-ng [enable | disable |required]
short-guard-interval [enable | disable]
Defaults None
Access Enabled
History
set service-profile active-call-idle-timeout
Set the length of time that a VoIP connection can be idle before the connection times out on the
network.
Syntax set service-profile profile-name active-call-idle-timeout timeout
Defaults None
Access Enable
History Introduced in MSS Version 7.1.
profile-name
Name of the service profile.
a-mpdu-max-length
Configures the length of the MPDU packet in kilobytes.
Select from 8, 16, 32, or 64K.
a-msdu-max-length
Configures the length of the MSDU packet in kilobytes.
Select from 8, 16, 32, or 64K.
frame-aggregation
Enables aggregation of MPDU and MSDU packets.
Select either MPDU or MSDU or all. You can also disable
this option.
mode-na
Set the 11n mode to na for the profile.
mode-ng
Set the 11n mode to ng for the profile.
short-guard-interval
Configure this option to prevent inter-symbol
interference on the 802.11n network.
Version 7.0 Command introduced.
Version 7.1 Options mode-na and mode-ng added.
profile-name
Name of the service profile.
timeout
Configures the length of in seconds. You can set this to a
value from 20 to 300.