Operation Manual

MP Access Point Commands
Mobility System Software Command Reference Guide
Version 7.3
12 – 268
set radio-profile cac video
Syntax set radio-profile profile-name cac video {max-utilization percentage | mode
[enable | disable] | policing [enable | disable]}
Defaults None
Access Enabled
History Introduced in MSS Version 7.0.
set radio-profile cac voice
Sets Quality of Service (QoS) options for a radio profile.
Syntax set radio-profile profile-name cac voice {max-utilization percentage | mode
[enable | disable] | policing [enable | disable]}
Defaults None
Access Enabled
History Introduced in MSS Version 7.0.
set radio-profile countermeasures
Enables or disables countermeasures on the MP radios managed by a radio profile.
Countermeasures are packets sent by a radio to prevent clients from being able to use rogue
access points.
MP radios can also issue countermeasures against interfering devices. An interfering device is not
part of the Trapeze network but also is not a rogue. No client connected to the device has been
detected communicating with any network entity listed in the forwarding database (FDD) of any
MX in the Mobility Domain. Although the interfering device is not connected to your network, the
device might be causing RF interference with MP radios.
profile-name
Name of radio profile.
max-utilization
percentage
Set maximum admission control limit for video traffic.
You can configure a percentage from 1 to 100 percent.
mode
Configures CAC to be mandatory for the radio profile.
policing
Configure admission control policing for the radio profile.
profile-name
Name of radio profile.
max-utilization
percentage
Set maximum admission control limit for voice traffic.
You can configure a percentage from 1 to 100 percent.
mode
Configures CAC to be mandatory for the radio profile.
policing
Configure admission control policing for the radio profile.