Operation Manual

System Services Commands
Mobility System Software Command Reference Guide
Version 7.3
4 – 30
Access Enabled
History Added in MSS 7.1.
Examples To set the console timeout to 120 seconds (2 minutes), use the following command:
MX# set system console-timeout 120
success: change accepted.
set system contact
Stores a contact name for the MX.
Syntax set system contact string
Defaults None.
Access Enabled.
History
To view the system contact string, type the show system command.
Examples The following command sets the system contact information to [e-mail]:
MX# set system contact [e-mail]
success: change accepted.
See Also
● clear system on page 4-21
● set system location on page 4-35
● set system name on page 4-36
● show system on page 4-40
set system countrycode
Defines the country-specific IEEE 802.11 regulations to enforce on the MX.
Syntax set system countrycode code
string Alphanumeric string up to 256 characters long.
MSS Version 1.0 Command introduced.
MSSVersion 7.3 Ability to include spaces added.
code Two-letter code for the country of operation for the MX. You can specify one
of the codes listed in Table 4– 1.
Table 4– 1. Country Codes
Country Code
Algeria DZ
Argentina AR