Operation Manual

MP Access Point Commands

12 – 243

Syntax

set ap auto force-image-download {enable | disable}

Defaults

Forced image download is disabled by default.

Access

Enabled.

History

Usage

A change to the forced image download option takes place the next time the MP is

restarted.

Even when forced image download is disabled (the default), the MP still checks with the MX to

verify that the MP has the latest image, and to verify that the MX is running MSS Version 5.0 or

later.

The MP loads a local image only if the MX is running MSS Version 5.0 or later and does not have a

different MP image than the one in the MP local storage. If the MX is not running MSS Version 5.0

or later, or the MX has a different version of the MP image than the version in the MP local

storage, the MP loads the image from the MX.

The forced image download option is not applicable to MP models MP-52, MP-101, and MP-122.

Examples

The following command enables forced image download on Distributed MP 69:

MX# set ap 69 force-image-download enable

success: change accepted.