Operation Manual

Network Domain Commands
Mobility System Software Command Reference
Version 7.3
11 – 214
● set network-domain mode seed domain-name on page 11-216
clear network-domain mode
Removes the Network Domain seed or member configuration from the MX.
Syntax clear network-domain mode {seed | member}
Defaults None.
Access Enabled.
History Introduced in MSS 4.1.
Usage This command has no effect if the MX is not configured as part of a Network Domain.
Examples The following command clears the Network Domain member configuration from the
MX:
MX-20# clear network-domain mode member
success: change accepted.
The following command clears the Network Domain seed configuration from the MX:
MX-20# clear network-domain mode seed
success: change accepted.
See Also
● set network-domain mode member seed-ip on page 11-215
● set network-domain mode seed domain-name on page 11-216
clear network-domain peer
Removes the configuration of a Network Domain peer from an MX configured as a Network
Domain seed.
Syntax clear network-domain peer {peer-ip | all}
Defaults None.
Access Enabled.
History Introduced in MSS 4.1.
Usage This command has no effect if the MX is not configured as a Network Domain seed.
Examples The following command clears the Network Domain peer configuration for peer
192.168.9.254 from the MX:
MX-20# clear network-domain peer 192.168.9.254
success: change accepted.
The following command clears the Network Domain peer configuration for all peers from the MX:
MX-20# clear network-domain peer all
seed Clears the Network Domain seed configuration from the MX.
member Clears the Network Domain member configuration from the MX.
ip-addr IP address of the Network Domain peer in dotted decimal notation.
all Clears the Network Domain peer configuration for all peers from the MX.