Operation Manual

Network Domain Commands 11 – 213

Network Domain Commands

Use Network Domain commands to configure and manage Network Domain groups.

A Network Domain is a group of geographically dispersed Mobility Domains that share

information over a WAN link. This shared information allows a user configured on an MX in one

Mobility Domain to establish connectivity with an MX in another Mobility Domain in the same

Network Domain. The MX forwards the user traffic by creating a VLAN tunnel to an MX in the

remote Mobility Domain.

In a Network Domain, one or more MX switches serve as a seed switch. At least one of the

Network Domain seeds maintains a connection with each of the member MX switches in the

Network Domain. The Network Domain seeds share information about the VLANs configured on

their members, so that all the Network Domain seeds have a common database of VLAN

information.

This chapter presents Network Domain commands alphabetically. Use the following table to

locate commands in this chapter based on their use.

clear network-domain

Clears all Network Domain configuration and information from an MX, regardless of whether the

MX is a seed or a member of a Network Domain.

Syntax

clear network-domain

Defaults

None.

Access

Enabled.

History

Introduced in MSS 4.1.

Usage

This command has no effect if the MX is not configured as part of a Network Domain.

Examples

To clear a Network Domain from an MX within the domain, type the following

command:

MX-20# clear network-domain

This will clear all network-domain configuration. Would you like to continue? (y/n) [n] y

success: change accepted.