Operation Manual

Mobility Domain Commands
Mobility Domain Commands
10 – 213
See Also
● clear mobility-domain on page 10-204
● set mobility-domain member on page 10-207
● set mobility-domain mode member seed-ip on page 10-208
show mobility-domain ap-affinity-groups
Displays affinity information for a Mobility Domain configuration.
Syntax show mobility-domain ap-affinity-groups
Defaults None
Access Enabled
History Introduced in MSS 7.1.
upgrade cluster
Network resiliency enhancements now allows you to perform an in-service software upgrade on a
cluster configuration.
Access Enabled
History Added in MSS 7.1
Usage The upgrade assumes that the old and new versions of MSS are 7.1 and higher.
Syntax upgrade cluster [force]
Flags Indicates various states of the Mobility Domain
members.
❑ u = up
❑ d = down
❑ c = cluster enabled
❑ p = primary seed
❑ s = secondary seed
❑ m = member
❑ a = active seed
❑ y = syncing
❑ w = waiting to sync
❑ n = sync completed
❑ f = sync failed
Member IP addresses of the seed MX and members in the
Mobility Domain
Flags State of the MX in the Mobility Domain:
Letters indicate which flags are present.
Model Model of MX switch
Version MSS version running on the MX.
NoAPs Number of APs per MX
APLic Number of AP licensed per MX.
Table 10– 1. show mobility-domain Output (continued)