Operation Manual

Mobility Domain Commands
Mobility System Software Command Reference Guide
Version 7.3
10 – 212
Syntax show cluster upgrade
Defaults None
Access Enabled
History Introduced in MSS 7.1.
show mobility-domain config
This command was deprecated in MSS 7.0
show mobility-domain
On the seed MX, displays the Mobility Domain status and members.
Syntax show mobility-domain
Defaults None.
Access Enabled.
History
Examples
To display Mobility Domain status, type the following command:
MX# show mobility-domain
Mobility Domain name: Mobility1
Flags: u = up[2], d = down[2], c = cluster enabled[1], p = primary seed,
s = secondary seed (S = cluster preempt mode enabled), m = member, a = active seed, y =
syncing, w = waiting to sync, n = sync completed, f = sync failed
Member Flags Model Version NoAPs APCap
--------------- ----- -------- ---------- ----- -----
10.8.107.1 upacn MX-20 7.0.1.0 0 40
10.2.28.71 dm--- Unknown Unknown 0 0
10.2.28.72 dm--- Unknown Unknown 0 0
10.2.28.74 um--- MX-20 7.0.1.0 0 40
Table 10– 1 describes the fields in the display.
Version 1.0 Command introduced
Version 7.0 Updated with cluster information
Table 10– 1. show mobility-domain Output
Field Description
Mobility Domain name Name of the Mobility Domain