Operation Manual

ManualsBrandsTrapeze smart mobile ManualsSoftwareMobility System Software 7.3

201

202

203

204

205

206

207

208

209

210

Mobility Domain Commands

10 – 211

History

Introduced in MSS 7.0.

Examples

The following command displays the cluster configuration and resiliency state:

Network Resiliency Cluster Enabled

Mode : PRIMARY-SEED

Active Seed : YES

Network is Resilient

show cluster ap

Displays all MPs configured on cluster member.

Syntax

show cluster ap

Defaults

None

Access

Enabled

History

Introduced in MSS 7.0.

Examples

The following command displays the MPs configured on a cluster member:

MX# show cluster ap

Primary AP Manager(PAM) and Secondary AP manager(SAM) List:

Flags:L - Cluster Load Balancing; C - Connection Wait; S - Session setup Wait

AP PAM MX IP SAM MX IP AP connected to PAM AP connected to SAM

---- --------------- --------------- ------------------- -------------------

3 192.168.254.85 192.168.254.83 YES YES

12 192.168.254.83 192.168.254.85 YES YES

6 192.168.254.85 192.168.254.83 YES YES

15 192.168.254.85 192.168.254.83 YES YES

9 192.168.254.85 192.168.254.83 YES YES

14 192.168.254.83 192.168.254.85 YES YES

10 192.168.254.83 192.168.254.85 YES YES

4 192.168.254.85 192.168.254.83 YES YES

5 192.168.254.85 192.168.254.83 YES YES

1 192.168.254.85 192.168.254.83 YES YES

2 192.168.254.85 192.168.254.83 YES YES

8 192.168.254.83 192.168.254.85 YES YES

7 192.168.254.85 192.168.254.83 YES YES

show cluster upgrade

Displays the upgrade status of each member in the cluster and displays the number of APs that

have been upgraded and how many upgrades are pending on APs.