Operation Manual
Mobility Domain Commands
Mobility System Software Command Reference Guide
Version 7.3
10 – 208
success: change accepted.
MX# set mobility-domain member 192.168.1.10
success: change accepted.
See Also
● clear mobility-domain member on page 10-205
● set mobility-domain mode seed domain-name on page 10-210
● show mobility-domain config on page 10-212
set mobility-domain mode member secondary-seed-ip
Sets the IP address of the secondary seed MX on a nonseed MX.
Syntax
set mobility-domain mode member ip-addr secondary-seed-ip
secondary-seed-ip-addr key hex-bytes
Defaults
None.
Access
Enabled.
History
Introduced in MSS 1.0
Examples
The following command sets the current MX as a nonseed member of the Mobility
Domain whose secondary seed has the IP address 192.168.1.8:
MX# set mobility-domain mode member seed-ip 192.168.1.8
mode is: member
seed IP is: 192.168.1.8
See Also
● clear mobility-domain on page 10-204
● show mobility-domain config on page 10-212
set mobility-domain mode member seed-ip
On a nonseed MX, sets the IP address of the seed MX. This command is used on a member MX to
configure it as a member. If the MX is currently part of another Mobility Domain or using another
seed, this command overwrites that configuration.
Syntax
set mobility-domain mode member seed-ip ip-addr key hex-bytes
Defaults
None.
ip-addr IP address of the mobility domain member.
secondary-seed-ip-addr IP address of the secondary seed, in dotted decimal notation.
key hex-bytes Fingerprint of the public key to use for MX-MX security. Specify the key
as 16 hexadecimal bytes. Use a colon between each byte, as in the
following example:
00:11:22:33:44:55:66:77:88:99:aa:bb:cc:dd:ee:ff
ip-addr IP address of the Mobility Domain member, in dotted decimal notation.
key hex-bytes Fingerprint of the public key to use for MX-MX security. Specify the key as 16
hexadecimal bytes. Use a colon between each byte, as in the following example:
00:11:22:33:44:55:66:77:88:99:aa:bb:cc:dd:ee:ff