Operation Manual

Mobility Domain Commands
Mobility System Software Command Reference Guide
Version 7.3
10 – 204
clear domain security
Disables MX-MX security.
Syntax clear domain security
Defaults None.
Access Enabled.
History Introduced in MSS 5.0.
Usage This command is equivalent to the set domain security none command.
Examples The following command disables MX-MX security on an MX:
MX-20# clear domain security
success: change accepted.
clear mobility-domain
Clears all Mobility Domain configuration and information from an MX, regardless of whether the
MX is a seed or a member of a Mobility Domain.
Syntax clear mobility-domain
Defaults None.
Access Enabled.
History Introduced in MSS 1.0.
Usage This command has no effect if the MX is not configured as part of a Mobility Domain.
Examples To clear a Mobility Domain from an MX within the domain, type the following
command:
MX-20# clear mobility-domain
success: change accepted.
See Also
● clear mobility-domain member on page 10-205
● set mobility-domain member on page 10-207
● set mobility-domain mode member seed-ip on page 10-208
● set mobility-domain mode seed domain-name on page 10-210
clear mobility-domain ap-affinity-group
Clears the AP affinity configuration from the Mobility Domain.
show cluster on page 10-210
sshow cluster ap on page 10-211