Operation Manual
AAA Commands
AAA Commands
9 – 201
See Also
● clear accounting on page 9-148
● set accounting {admin | console} on page 9-160
● show aaa on page 9-190
show location policy
Displays the list of location policy rules that make up the location policy on an MX.
Syntax
show location policy
Defaults
None.
Access
Enabled.
History
Introduced in MSS Version 1.1.
Examples
The following command displays the list of location policy rules in the location policy on
an MX :
MX show location policy
Id Clauses
----------------------------------------------------------------
1) deny if user eq *.theirfirm.com
2) permit vlan guest_1 if vlan neq *.wodefirm.com
3) permit vlan bld4.tac inacl tac_24.in if user eq *.ny.wodefirm.com
See Also
● clear location policy on page 9-153
● set location policy on page 9-175
show mobility-profile
Displays the named Mobility Profile. If you do not specify a Mobility Profile name, this command
shows all Mobility Profile names and port lists on the MX.
Syntax
show mobility-profile [name]
Defaults
None.
Access
Enabled.
Acct-Output-Packets Number of packets the MX sent during the session.
Acct-Input-Packets Number of packets the MX received during the session.
Vlan-Name Name of the client VLAN.
Calling-Station-Id MAC address of the supplicant (client).
Nas-Port-Id Number of the port and radio on the MP through which
the session was conducted.
Called-Station-Id MAC address of the MP through which the client reached
the network.
name Name of an existing Mobility Profile.
Table 9– 15. show accounting statistics Output (continued)
Field Description