Operation Manual

System Services Commands
Mobility System Software Command Reference Guide
Version 7.3
4 – 20
Syntax clear banner motd
Defaults None.
Access Enabled.
History Introduced in MSS Version 1.0.
Examples To clear a banner, type the following command:
MX# clear banner motd
success: change accepted
See Also
● set banner motd on page 4-26
● show banner motd on page 4-36
clear history
Deletes the command history buffer for the current CLI session.
Syntax clear history
Defaults None.
Access All.
History Introduced in MSS Version 1.0.
Examples To clear the history buffer, type the following command:
MX# clear history
success: command buffer was flushed.
See Also history on page 4-23
clear prompt
Resets the system prompt to its previously configured value. If the prompt was not configured
previously, this command resets the prompt to the default.
Syntax clear prompt
Defaults None.
Access Enabled.
History Introduced in MSS Version 1.0.
Examples To reset the prompt, type the following command:
wildebeest# clear prompt
success: change accepted.
MX#
Note:
As an alternative to clearing the banner, you can overwrite the existing banner with
an empty banner by typing the following command: set banner motd ^^