Operation Manual

AAA Commands
AAA Commands
9 – 153
Defaults None.
Access Enabled.
History Introduced in MSS 3.0.
Examples The following command removes WebAAA for SSID research and userglob
temp*@thiscorp.com:
MX# clear authentication web ssid research temp*@thiscorp.com
See Also
● clear authentication admin on page 9-149
● clear authentication console on page 9-150
● clear authentication dot1x on page 9-151
● clear authentication mac on page 9-151
● set authentication web on page 9-174
● show aaa on page 9-190
clear location policy
Removes a rule from the location policy on an MX.
Syntax clear location policy [ index | all ]
Defaults None.
Access Enabled.
History Introduced in MSS Version 1.1.
Usage To determine the index numbers of location policy rules, use the show location policy
command. Removing all the ACEs from the location policy disables this function on the MX.
Examples The following command removes location policy rule 4 from an MX location policy:
MX# clear location policy 4
success: clause 4 is removed.
See Also
● set location policy on page 9-175
● show location policy on page 9-201
wired Clears a rule used for access over an MX wired-authentication port.
user-glob User-glob associated with the rule you are removing.
index Index of MACE to clear ( 1...)
all Clears all policies
Version 1.1 Command introduced.
Version 7.0 rule-number replaced by the options index and all.