Operation Manual

ManualsBrandsTrapeze smart mobile ManualsSoftwareMobility System Software 7.3

IP Services Commands

IP Services Commands

8 – 147

If Traceroute receives an ICMP error message other than a Time Exceeded or Port Unreachable

message, MSS displays one of the error codes described in Table 8– 8 instead of displaying the

round-trip time or an asterisk (*).

Table 8– 8 describes the traceroute error messages.

See Also

ping on page 8-100

Table 8– 8. Error Messages for traceroute

Field Description

!N No route to host. The network is unreachable.

!H No route to host. The host is unreachable.

!P Connection refused. The protocol is unreachable.

!F Fragmentation needed but Do Not Fragment (DNF) bit was set.

!S Source route failed.

!A Communication administratively prohibited.

? Unknown error occurred.