Operation Manual

IP Services Commands
IP Services Commands
8 – 143
See Also
● set snmp community on page 8-116
● set snmp notify target on page 8-121
● set snmp notify profile on page 8-118
● set snmp protocol on page 8-124
● set snmp security on page 8-125
● set snmp usm on page 8-126
● show snmp community on page 8-141
● show snmp counters on page 8-142
● show snmp notify profile on page 8-142
● show snmp notify target on page 8-142
● show snmp usm on page 8-143
show snmp usm
Displays information about SNMPv3 users.
Defaults None.
Access Enabled.
History Introduced in MSS Version 4.0.
See Also
● clear snmp usm on page 8-98
● show snmp usm on page 8-143
show summertime
Shows an MX offset time from the real-time clock time.
Syntax show summertime
Defaults None.
Access All.
History Introduced in MSS Version 1.0.
Examples To display the summertime setting on an MX, type the following command:
MX-20# show summertime
Summertime is enabled, and set to 'PDT'.
Start : Sun Apr 04 2004, 02:00:00
End : Sun Oct 31 2004, 02:00:00
Offset : 60 minutes
Recurring : yes, starting at 2:00 am of first Sunday of April
and ending at 2:00 am on last Sunday of October.
See Also
● clear summertime on page 8-99
● clear timezone on page 8-100
● set summertime on page 8-128
● set timedate on page 8-130