Operation Manual

IP Services Commands
IP Services Commands
8 – 137
See Also
● clear ip dns domain on page 8-94
● clear ip dns server on page 8-94
● set ip dns on page 8-107
● set ip dns domain on page 8-107
● set ip dns server on page 8-108
show ip https
Displays information about the HTTPS management port.
Syntax show ip https
Defaults None.
Access All.
History Introduced in MSS Version 1.0.
Examples The following command shows the status and port number for the HTTPS management
interface to the MX switch:
MX> show ip https
HTTPS is enabled
HTTPS is set to use port 443
Last 10 Connections:
IP Address Last Connected
------------ ----------------------- ------------
10.10.10.56 2003/05/09 15:51:26 pst 349
Table 8– 4 describes the fields in this display.
Table 8– 3. Output for show ip dns
Field Description
Domain Name Default domain name configured on the MX
DNS Status Status of the MX DNS client:
❑ Enabled
❑ Disabled
IP Address IP address of the DNS server
Type Server type:
❑ PRIMARY
❑ SECONDARY
Table 8– 4. Output for show ip https
Field Description
HTTPS is enabled/disabled State of the HTTPS server:
❑ Enabled
❑ Disabled
HTTPS is set to use port TCP port number on which the MX listens for HTTPS connections.
Last 10 connections List of the last 10 devices to establish connections to the MX HTTPS server.