Operation Manual
IP Services Commands
IP Services Commands
8 – 135
See Also
set interface dhcp-server on page 8-104
show interface
Displays the IP interfaces configured on the MX.
Syntax
show interface [vlan-id]
Defaults
If you do not specify a VLAN ID, interfaces for all VLANs are displayed.
Access
All.
History
Usage
The IP interface table flags an address assigned by a DHCP server with an asterisk ( * ).
Examples
The following command displays all the IP interfaces configured on an MX:
MX# show interface
VLAN Name Address Mask Enabled State RIB
---- --------------- --------------- --------------- ------- ----- ---------
1 default 10.10.10.10 255.255.255.0 YES Up ipv4
2 mauve 10.10.20.10 255.255.255.0 NO Down ipv4
4 corpvlan *10.3.1.110 255.255.255.0 YES Up ipv4
Table 8– 1 describes the fields in this display.
See Also
● clear interface on page 8-92
● set interface on page 8-102
● set interface status on page 8-106
vlan-id VLAN name or number.
Version 1.0 Command introduced.
Version 4.0 RIB field added.
Table 8– 1. Output for show interface
Field Description
VLAN VLAN number
Name VLAN name
Address IP address
Mask Subnet mask
Enabled Administrative state:
❑ YES (enabled)
❑ NO (disabled)
State Link state:
❑ Up (operational)
❑ Down (unavailable)
RIB Routing Information Base