Operation Manual

IP Services Commands
Mobility System Software Command Reference Guide
Version 7.3
8 – 128
set snmp view
Controls SNMP view operations to allow difference levels of access to management information.
Syntax set snmp view view-name description description [root included | excluded]
treefamily oid-subtree [included| excluded]
Defaults All views excluded.
Access Enabled
History Added in MSS Version 7.0
Usage Controls access to SNMP operations.
Examples To include the root of the OIC tree, use the following command:
MX# set snmp view eng_dev description labs root include
success: change accepted
See Also
● clear snmp usm on page 8-98
● set ip snmp server on page 8-111
● set snmp community on page 8-116
● set snmp group on page 8-117
● set snmp notify target on page 8-121
● set snmp notify profile on page 8-118
● set snmp protocol on page 8-124
● show snmp usm on page 8-143
set summertime
Offsets the real-time clock of an MX by +1 hour and returns it to standard time for daylight savings
time or a similar summertime period.
Syntax set summertime summername [start week weekday month hour min end week weekday
month hour min]
view view-name The name configured for a view.
description description A text description of the view
root [included | excluded] Include or exclude the root of the OID tree.
treefamily [included | excluded] Include or exclude the OID treefamily.
summername Name of up to 32 alphanumeric characters that describes the summertime offset. You
can use a standard name or any name you like.
start Start of the time change period.
week Week of the month to start or end the time change. Valid values are first, second, third,
fourth, or last.
weekday Day of the week to start or end the time change. Valid values are sun, mon, tue, wed,
thu, fri, and sat.
month Month of the year to start or end the time change. Valid values are jan, feb, mar, apr,
may, jun, jul, aug, sep, oct, nov, and dec.
hour Hour to start or end the time change—a value between 0 and 23 on the 24-hour clock.