Datasheet

Trapeze Networks, A BELDEN Brand | Proprietary and Confidential | 1/27/2010 Slide 67

LDAP ‘set’ Commands

#set ldap server server-name [ address ip-address] { [auth-port port number ]

[timeout seconds ] [deadtime minutes] [bind-mode [simple-auth|sasl-md5]]

[fdqn dns-name] [mac-addr-format [hyphens|colons|one-hyphen-raw]] [base-dn

basednstring] }

#set ldap server group <name_group> <server_1> {[server_2 … server_4]]

#set ldap server group <name_group> load-balance [enable|disable]

#set authentication [web|mac] [ssid ssid_name | wired] <user_glob>

<ldap_group1> { [ldap_group2] [ldap_group3] [ldap_group4] } | local

#set authentication [admin|console] user_glob ldap_group1 { [ldap_group2]

[ldap_group3] [ldap_group4] } | local