Datasheet

AP LED and MIB Enhancements
AP LED and MIB Enhancements
• AP LED Control
• Allow the customer to set the LED behavior on an AP by AP basis
• The LED setting becomes active after the AP receives its configuration
• LEDs may be set in three ways:
– Auto (default): LEDS behave in Trapeze standard way
– Static: LEDS do not flash when traffic flows (all other LED behavior is as normal)
– Off: All LEDs are off once the AP is active
• A range of APs may be set at the same time
• AP MIBs
• Provides more complete AP configuration MIB information
– AP Configuration Table: indexed by AP Number
– Radio configuration Table: indexed by AP Number, Radio Number
– Radio Profiles Table: indexed by Radio Profile Name
– Service Profile Table connected to Radio Profile: indexed by Radio and Sevice
Profile Names
– Snoop Filters connected to Radio Profile
– AP Unconfigured MIB: AP Table indexed by AP Serial Number
– Auto-AP Template
Trapeze Networks, A BELDEN Brand | Proprietary and Confidential | 1/27/2010 Slide 22