Datasheet

Compliance

Safety and Electromagnetic Compliance • USA: UL 60950-1, current edition, plus all country deviations

• Canada: ICES 003, Class B, UL to CSA C22.2 No. 60950-1

• EU and EFTA: ETSI EN55022:1998 (Class B) and ETSI EN55024, EMC Directive 2004/108/EC

• Australia/New Zealand: AS/NZS CISPR 22, AS/NZS 4268, Class B

Environmental Compliance • WEEE: EU DIRECTIVE 2002/96/EC

• RoHS: DIRECTIVE 2003/95, 2006/122/EC, China-RoHS

• IEC: IP67

• NEMA: Type 4x

• Primary and Secondary lightning protection as per UL497 / UL497A and ITU K44 / K45 for 48VDC / Ethernet port only

Standard Compliance • 802.3i 10BASE-T Ethernet

• 802.3u 100BASE-TX Fasy Ethernet

• 802.3ab 1000BASE-TX Gigabit Ethernet

• 802.1X Network Access Control and Mutual Authentication

• 802.11 a, 802.11 b, 802.11 g, 802.11 n Wireless Ethernet

• 802.11 e quality of service (QoS)(WMM), call admission control (TSPEC), unscheduled power save delivery (U-APSD)

• 802.11 i Fast Roaming (PMK Cache), encryption (AES/CCMP and TKIP)

• Wi-Fi Alliance Protected Access 1.0 (WPA) and 2.0 (WPA2)

• Wi-Fi Alliance Multimedia (WMM)

• IETF CAPWAP WG Taxonomy and Architecture compatibility

Ordering Information

MP-632-01 • Outdoor 802.11n AP with dual radios: 802.11an and 802.11gn, single Gigabit Ethernet data port, weather-sealing caps for antenna

connectors, brackets for wall or pole mount and environmentally hardened outdoor power supply (100-240 VAC 50-60Hz input) bundle.

Includes AC input cable with stripped ends for either direct wiring or connection to a three-prong plug (plug not included).

MP-632-02 • Outdoor 802.11n AP with dual radios: 802.11an and 802.11gn, single Gigabit Ethernet data port, weather-sealing caps for antenna

connectors, brackets for wall or pole mount and environmentally hardened outdoor power supply (100-240 VAC 50-60Hz input) bundle.

Includes conduit coupling (Heyco 1/2” ID conduit fitting HFC-Z 1/2) for direct connection to 1/2” inside diameter steel conduit.

Optional Accessories

ANT-7360A-OUT • 360° Outdoor dual-band 802.11n omni-directional antenna for 802.11n APs. Has 6 (8dB) gain in the 2.4GHz (5GHz) band; includes mast

mounting kit and one 36” Type N Male to Type N Male low loss cable. Requires one unit for each coaxial connector on the AP.

ANT-74520-OUT • Indoor/outdoor dual-band three-element 802.11n directional panel antenna for 802.11n APs. Has 10.9dB (13.5dB) gain in the 2.4GHz

(5GHz) band; has 45 degree (20 degree) horizontal beamwidth in the 2.4GHz (5GHz) band. Includes articulating wall/mast mounting kit

and three integrated 36” cables with adapters for direct connection to either the MP-632 or the MP-82. Requires only one unit per radio.

For outdoor use, three lightning suppression kits are recommended with this antenna (such as either the ANT-LGTNG-OUT or the

ANT-PROT-OUT).

ANT-77555-OUT • Indoor/outdoor dual-band three-element 802.11n directional panel antenna for 802.11n APs. Has 8dB (10.7dB) gain in the 2.4GHz (5GHz)

band; has 75 degree (55 degree) horizontal beamwidth in the 2.4GHz (5GHz) band. Includes articulating wall/mast mounting kit and three

integrated 36” cables with adapters for direct connection to either the MP-632 or the MP-82. Requires only one unit per radio. For

outdoor use, three lightning suppression kits are recommended with this antenna (such as either the ANT-LGTNG-OUT

or the ANT-PROT-OUT).

ANT-5007-OUT • Outdoor two-element cross-polarized 802.11n high-gain directional panel antenna for use in the 5GHz band with 802.11n APs. Has

23.5dB gain, 7 degree vertical beamwidth, and 7 degree horizontal beamwidth. Includes articulating wall/mast mounting kit and two 36”

Type N Male to Type N Male low loss cables. Requires only one unit per radio. For outdoor use, two lightning suppression kits are

recommended with this antenna (such as either the ANT-LGTNG-OUT or the ANT-PROT-OUT).

ANT-PROT-OUT • N-Male to N-Female Lightning Protector for direct mount onto MP-632. Requires one unit for each coaxial cable on the antenna.

www.trapezenetworks.com

DS_MP632_092409