Datasheet

Mobility Point MP-632 (continued)
2
The MP-632 plays a key role in rogue and
intrusion detection as well as denial-of-service
(DoS) attack detection. ActiveScan allows
MPs to fulfill a dual role. They scan all 802.11
bands, channels and VLANs while simultane-
ously providing wireless connectivity to mobile
clients. SentryScan allows MPs or individual
MP radios to act as dedicated sentries, provid-
ing nonstop scanning.
The MP-632 uses the same Mobility System
Software™ as all other Trapeze Mobility Points.
For more information about the security and
networking capabilities of the MP-632, please
read the Mobility System Software datasheet.
The MP-632 is simple to deploy and easy to
manage and supports any kind of service -
data, voice, video and location - over Wi-Fi.
It automatically calculates the data integrity
and RF signal strength of the wireless channel
and continually tunes optimal RF channel and
transmit power, while enforcing the prioritiza-
tion of delay-sensitive voice and other critical
applications. Wi-Fi Multimedia (WMM) or
SpectraLink™ Voice Priority (SVP) can be con-
figured to ensure optimal QoS for voice traffic.
Policies allow per user, protocol or class-of-
service (CoS) mapping.
Key Features
Radios
Dual radios • 802.11a/n (5GHz) and 802.11b/g/n (2.4GHz) concurrent operation
Scalability
Clients • Supports up to 500 simultaneous clients
Encryption • Dedicated hardware-based line-rate encryption for certified operation of WPA (TKIP), WPA2, (AES), 40-bit WEP,
128-bit WEP, and Dynamic WEP with per session rotating keys
Bridging & Mesh
Wireless Bridging • Point-to-point (P-P) and Point-to-Multipoint (P-MP) operations
Wireless Backhaul • Point-to-point (P-P) and Point-to-Multipoint (P-MP) operations
Enterprise Ethernet Mesh Service • Mesh portal operation
• Mesh access point operation
802.11n
• 3 x 3 MIMO (3 Radio Transmit and 3 Radio Receive chains) with two spatial streams
• 20 MHz and 40 MHz channels
• PHY data rates up to 300 Mbps per radio. 600 Mbps aggregate total
• Adaptive Frame Aggregation [L2 (MPDU-Aggregation) and L3 (MSDU Aggregation)]
• Maximal Ratio Combining (MRC)
• Cyclic Delay Diversity (CDD)
Security
Physical Security • Safe tamper-proof design with completely sealed enclosure
• No data, security credentials or encryption keys stored locally
• No console port; no local access possible
• If stolen, no configuration information or data goes with it
• Stolen AP can be “blacklisted”
WIDS/WIPS • Either radio can be configured independently for ActiveScan or SentryScan
Installation
Mounting • Wall/Pole mount bracket attaches to triangular swivel collar on AP for flexible positioning
Powering • Choice of two environmentally hardened outdoor power supplies
• Dedicated 48VDC power port on ruggedized 8-pin (male) DIN connector
RF Planning • Outage resiliency planning for RF Auto-Tuning using RingMaster
®