Datasheet

3
MANAGEMENT AND CONTROL
Scalability and Resiliency • Supports up to 500 simultaneous clients
• Direct Data Path Forwarding enables local switching of data traffi c in the
Mobility Point or forwarding of data to Mobility Point
• Dedicated hardware based encryption support
• Dual attached power-over-ethernet (PoE) with redundant network link
• RingMaster based outage resiliency planning for RF Auto-Tune
Intelligent Switching • MP confi gured for simultaneous direct data path distributed switching, or
centralized switching depending on the needs of the application
• Optimizes traffi c fl ow for radically reduced latency and massive scalability
• Optimizes network capacity, performance and utilization
• Optimizes MX traffi c loading, capacity, performance and utilization
• Management, control and confi guration retained in MX
Installation and Confi guration • Zero confi guration installation with no pre-staging
• One-snap invisible ceiling grid attachment
• Mobility Point confi gured by MX
• True omni-directional antenna allows position independent placement
Client Load Balancing • Equalize client sessions across groups of MPs with like Service Policies
• Restore equality of session load across groups of MPs with like service
profi les when new MPs are added or an MP returns from transient outage
• Equalize balanced group of MPs across multiple MXs in a Mobility Domain
• Client steering across 802.11a/b/g bands to maximize usage and
consistently balance load over the available spectrum
Specifi cations
HARDWARE SPECIFICATIONS
Dimensions (HxWxD) • 7.8 in (19.81 cm) x 7.8 in (19.81 cm) x 2.76 in (7.0 cm)
Weight • 3.53 lbs (1.6 kg)
Interfaces • 10/100 Fast Ethernet port for unshielded twisted pair (UTP) connectivity on
ruggedized 8-pin DIN connector with power-over-ethernet (PoE) provided by
supplied POE injector, and supplied 50-meter 8-pin DIN to RJ-45 cable
• Two External N-type female connectors for external 802.11a (5GHz) and
802.11b/g (2.4 GHz) antennas (ordered seperately)
Environmental • Operating temperature: -30
0
C to 55
0
C
• Storage temperature: -30
0
C to 55
0
C
• Humidity: 15% - 95% (non-condensing)
Power • -48 VDC, 1.2 Arms, 30 watts peak during dual-radio operation
• Extenal auto-sensing POE injector (NOT 802.3af compliant)
• Input: 100-240 VAC, 1.5 Arms Output: 48 VDC, 1.2 Arms
Status Indicators • Power ON/OFF provided on external power injector
DATA SHEET — MOBILITY POINT
™
MP-620