User's Manual
Table Of Contents
- So what is a gateway?
- So how Do I figure out the Subnet Mask?
- So how does this IP thing work?
- What do you mean by a routable subnet?
- So what is a Router?
- Connecting Multiple Clients to the Internet using NAT
- Examples
- Public IP’s to less than 10 Clients Through One Radio
- Public IP’s to multiple Clients Through One Radio
- Product Quality
- Service and Environment
- Additional Comments
- About You (optional)
212121
DHCP Configuration
This window shows the configuration of the DHCP server.
IP Parameters
DNS
Subnet Mask:
Enter your subnet mask in this field.
Gateway:
Select This Unit to use the gateway set on the WAN
interface. Select Other to use a different gateway.
Lease Time:
Indicates the expiration time for the IP address
assigned by the DHCP server.
Address Starting from:
Indicates the first address in the DHCP pool.
Number of Addresses:
Indicates the number of addresses in the DHCP pool.
Server IP Address:
Select WAN Assigned to use the DNS server IP
addresses assigned on the WAN side. To use different
DNS servers, select Static, in which case you must
enter the Primary and Secondary IP addresses.
Domain Name:
Apply the same configuration as for Server IP
Address.
WINS:
Apply the same configuration as for Server IP
Address.