User's Guide

Chapter 13: Virtual Access Point (VAP) Configuration
TR0190 Rev. A1 80
Figure 42. Virtual access point and wired interface DHCP and address space settings
If the local DHCP server is enabled for an VAP interface, IP addresses must be reserved for
statically configured devices by setting the DHCP reserve parameter. This will reserve the
specified number of IP addresses at the bottom of the IP range for the interface. For example,
if the interface has the IP address 10.2.4.1, the netmask 255.255.255.128, and the DHCP
reserve value 5, the IP addresses 10.2.4.2 through 10.2.4.6 will be available for use by
statically configured devices. The remaining IP addresses in the interface’s address space can
be assigned by the DHCP server to other client devices.