User's Guide

Chapter 13: Virtual Access Point (VAP) Configuration
TR0190 Rev. A1 77
13.4 Channel
The EL-500HG has an 802.11b/g radio that can be set to operate in the channels listed in
Table 9.
Channel Center Frequency (GHz)
1 2.412
2 2.417
3 2.422
4 2.427
5 2.432
6 2.437
7 2.442
8 2.447
9 2.452
10 2.457
11 2.462
Table 9. EL-500HG access point channels and associated center frequencies
Note that only channels 1, 6, and 11 are non-overlapping.
The EL-500HA has an 802.11a radio that can be set to operate in the channels listed in Table
10.
Channel Center Frequency (GHz)
149 5.745
153 5.765
157 5.785
161 5.805
165 5.825
Table 10. EL-500HA access point channels and associated center frequencies
It is not possible to configure the VAPs to use different channels. If the
channel for wlan2 is changed, the channel will be changed for wlan1, wlan3,
and wlan4.
CLI
The VAP channel is set with the ‘channel’ parameter in the ‘wlanN’ interfaces. The example
below shows how to set the VAP channel to 6.
> use wlan1