Manualshelf

User's Guide

ManualsBrandsTranzeo Wireless Technologies ManualsElectronics2.4/5.8 GHz OUTDOOR ACCESS POINT
21222324252627282930
Chapter 4: Using the Command Line Interface
TR0190 Rev. A1 28
4.5.10 ‘ifconfig’ command
Syntax
ifconfig <eth0|wlan[1-4]>
Description
Displays information, such as IP address and MAC address, for the
specified network interface.
Example
ifconfig wlan1
will display
wlan1 Link encap:Ethernet HWaddr 00:15:6D:52:01:FD
inet addr:10.2.10.1 Bcast:172.29.255.255 Mask:255.255.0.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:2434 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:0 (0.0 b) TX bytes:233128 (227.6 Kb)
4.5.11 ‘route’ command
Syntax
route
Description
Displays the current route table.
4.5.12 ‘clear’ command
Syntax
clear
Description
Clears the screen