User's Guide

Chapter 3: Using the Web Interface
TR0190 Rev. A1 19
click on the “Save Changes” button. It typically takes a few seconds to save the changes, after
which the page will be reloaded.
For the changes to take effect, the EL-500 must be rebooted. After a change has been
committed, a message reminding the user to reboot the EL-500 will be displayed at the top of
the screen.
Figure 7. Page showing "Save Changes" button and message prompting the user to reboot
3.4 Help Information
Help information is provided on most web GUI pages. The help information is shown on the
right-hand side of the page. The help information can be hidden by clicking on the ‘Hide Help’
link inside the help frame. When help is hidden, it can be displayed by clicking on the ‘Show
help’ link.
3.5 Rebooting
Click on the “Reboot” link on the left of the page and then click on the “Reboot Now” button to
reboot the EL-500. Any changes made prior to rebooting will take effect following completion of
the boot process.
It takes approximately 3 minutes for the device to reboot.