User's Guide

Chapter 3: Using the Web Interface
TR0190 Rev. A1 16
3 Using the Web Interface
The EL-500 has a web interface accessible through a browser that can be used to configure
the device and display status parameters.
3.1 Accessing the Web Interface
You can access the web interface by entering one of the EL-500’s IP addresses in the URL
field of a web browser (see section 2.2 for a description of how to access an unconfigured EL-
500 using its Ethernet interface). When you enter this URL, you will be prompted for a login
and password. The default login and password used for the web interface are ‘admin’ and
‘default’, respectively.
Figure 3. Login window for web interface
Since the certificate used in establishing the secure link to the EL-500 has not been signed by
a Certification Authority (CA), your browser will most likely display one or more warnings
similar to those shown below. These warnings are expected and can be disregarded.
Figure 4. Certificate warning