Manualshelf

User's Guide

ManualsBrandsTranzeo Wireless Technologies ManualsElectronics2.4/5.8 GHz OUTDOOR ACCESS POINT
121122123124125126127128129130
Chapter 19: Integration with Enterprise Equipment
TR0190 Rev. A1 128
> use sys
sys> set l2.hide_internal.enable=yes
sys> set l2.hide_internal.gateway.deny.all=yes
Web GUI
The state of layer 2 emulation is set on the “System” tab of the “System” page (see Figure 61).
The console interface in the web GUI must be used to configure which address ranges the EL-
500 responds to ARP requests for. See the CLI section above for parameter names and set
these using the console interface (see section 9.10).
Figure 61. Enabling/disabling layer 2 emulation