User's Guide

Chapter 17: Quality of Service (QoS) Configuration
TR0190 Rev. A1 112
Figure 52. Advanced QoS configuration (only settings for some interfaces are shown)
17.2 Rate Limiting
A rate limit can be set at each QoS Control Point shown in Figure 53. The Control Points can
be split into three groups, listed below in decreasing order of importance:
• Interface output limit
• Interface output limit of traffic from a particular interface
• Interface output limit of traffic of a certain type from a particular interface
All rate limit parameter values are in kbps. If no rate limit parameter is set, rate
limiting will be disabled for that interface or interface and traffic combination.